Xs-Xh Weather Station Equipment Rain and Snow Thickness Sensor Snow Depth Sensor

• Customized: Customized
• Power Supply: DC 12 to 24V
• Communication Mode: RS485/Current Mode
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: XS-XH
• Power Consumption 1: 180MW(at Room Temperature)
• Power Consumption 2: 3W(Low Temperature (<5ºC) Automatic Heating)
• Baud Rate: 9600BPS
• Storage Environment: -40 to 65ºC; 100% Rh or Less
• Effective Range: 0.0 -- 3000.0mm
• Measurement Accuracy: ±1%Fs
• Instrument Line Length: Standard 5 Meters
• Transport Package: Covered with Carton Package
• Trademark: Veinasa
• Origin: China
• Package Size: 25.00cm * 22.00cm * 20.00cm
• Package Gross Weight: 1.300kg

Product Description

XS-XH Weather Station Equipment Rain and Snow Thickness Sensor Snow Depth Sensor
 

Product Description

 

XS-XH Weather station equipment rain and snow thickness sensor snow depth sensor is an intelligent snow depth sensor using ultrasonic remote sensing technology to realize automatic and continuous snow depth monitoring. The depth of snow is calculated by measuring the time difference of the signal between the process of transmitting and returning by transmitting 50KHz ultrasonic. This product can be widely used in meteorological, airport, port, laboratory, industry and agriculture, transportation and other
fields of measurement.

Product Parameters

Power supply voltage	DC 12 to 24V
Communication mode	RS485/ Current mode
Power consumption	at room temperature: 180mW
	Low temperature (<5ºC) automatic heating: 3W
Baud rate	9600bps
Storage environment	-40 to 65ºC; 100% RH or less
Effective range	0.0 -- 3000.0mm
Measurement accuracy	±1%FS
Instrument line length	Standard 5 meters

Weather station equipment rain and snow thickness sensor snow depth sensor as shown in the picture: 2 M4 x 25 screws pass through two installation holes in the front end of the inductor, and 2 M4 x 35 screws in the back end of the inductor, making the inductorninduction plane parallel to the horizontal plane and fixing the inductor on the mounting seat.
 

Wiring Method

(1) If the collector produced by our company is equipped the sensor can be directly connected to the corresponding interface on the collector by using the sensor cable.

(2) If the inductor is purchased separately the matching line sequence of inductor is shown in the following table:

 

Color	Output signal
	Current pattern	Communication type
Red	Power positive	Power positive
Black (green) color	Power Ground	Power Ground
Yellow	Current signal	A
Blue		B

 

Application Case

XS-XH Weather station equipment rain and snow thickness sensor snow depth sensor features:

High accuracy, good stability
using ultrasonic remote sensing technology
 

Application:

Meteorological station
Airport
Port
Laboratory
 

Company Profile

 

FAQ

 

Packaging & Shipping