Htw-IC00X HVAC Module PT1000 Temperature and Humidity Transmitter Controller Capacitive Sensors ABS Plastic Integrated Circuits

• Contact: Contactless
• Output Signal Type: RS485/232, 4~20mA, 0-5V, 0-10V
• Measuring Medium: Temperature and Humidity
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HTW-IC00X
• Certification: CE
• Customized: Customized
• Product Name: Temperature and Humidity Transmitter
• Temperature Transmitter Component: PT1000 (Rate a)
• Humidity Transmitter Component: High Precision Humidity-Sensitive Capacitance of S
• Temperature Sensor Component: PT-1000, PT-100, Ntc10K, Ntc20K, Sht
• Temperature Measurement Range: 0~100%Rh
• Power Supply: DC24V±20%
• Transport Package: Covered with Carton Package
• Trademark: Veinasa
• Origin: China
• Package Size: 18.00cm * 16.00cm * 15.00cm
• Package Gross Weight: 1.300kg

Product Description

 

HTW-IC00X HVAC Module PT1000 Temperature and Humidity Transmitter Controller Capacitive Sensors ABS Plastic Integrated Circuits

Product Description

 

HTW-IC00X is an indoor temperature and humidity transmitter with the advantages of small shell,
soft shell, beautiful appearance, good gas circulation and easy installation. The device has
a microcomputer linear programming unit and a temperature compensation circuit.

 

It uses high precision PT1000 and humicap as the measuring unit and is designed as a protection circuit.
It can perform temperature and relative humidity measurements in a variety of harsh environments.
 

Product Parameters

 

Humidity transmitter Component	High precision Humidity-sensitive capacitance of Switzerland
Temperature transmitter Component	PT1000 (Rate A)
Temperature Sensor Component	PT-1000, PT-100, NTC10K, NTC20K, SHT
Measurement range	Humidity: 0~100%RH Temperature: 0~ 50ºC, 0~ 100ºC, -50~50CºC, -20~-80ºC
Power Supply	DC24V±20%
Output Signal	RS485/232, 4~20mA, 0-5V, 0-10V Load Resistance > 10KQ
Accuracy	Humidity:±2%,±3% (30%~ 90%RH) Temperature: ±0.2ºC,±0.3ºC
Wiring Terminals	Plug Port: 3.81mm 4PIN PBT; Screw Steel: M2; Contact Resistance: 20 mΩ
Wiring Connections	18~-22 AWG( 1.5 mm²),stripping length: 6~7mm
Storage Conditions	-20ºC~60ºC(<90%RH),non-condensing
Surge Immunity	Rate II
Enclosure material	ABS plastics (Polycarbonate ),White
Weight	82 ±5g Pro-environment: ROHS

Product Features

 

Features of HTW-IC00X HVAC Module PT1000 Temperature and Humidity Transmitter
Controller Capacitive Sensors ABS Plastic Integrated Circuits:

 

1Small size and light weight

2.Wide range of applications

3.Durable and waterproof

4. Good stability and fast response

5.High precision, fast response and high accuracy
 

Wiring Method

 

1.The terminals of Pow and Com are the power supply. When using 24Vdc input,please
note that the Pow connects the anode("+") the Com connects the cathode("--"), (The
device is reverse voltage protected and will not operate if connected backwards).
When using 24Vac input, don't consider the anode and cathode too much, but
the consideration of the code for electrical design and installation, advice that the
Pow connects the live line and the Com connects the zero line.

2."Rt" is the terminal of the temperature resistance signal out, when measuring
the temperature,the sensor option output is on the two terminals marked"Rt" and ''T".

 

 

 

Attention:

 

When using 24Vdc input, please note that the anode and the cathode of the power
( don't reverse the wiring)

The use of shielded cable is optional but recommended
for the highest noise immunity;

Disconnect the power supply before making any
connections to prevent electrical shock or equipment damage;

When mounting the device, the constructor should wear the antistatic gloves to avoid damaging the RH/Temperature transmitter

The device should be mounted away from any supply air exhausts or other sources of heat or cold;

It will thoroughness damage the polymer layer of the sensor when the device in the filed where it has chemical pollutant that has high density. The product should be stored where it is away from the source of chemical pollutant;

Specific practices refers to
Industrial Automation Project Construction & Technology

and Process Automation Instrumentation Project Construction & Acceptance Inspection RegulationGB50093-2002
 

Application Field

Company Profile