Veinasa-Rjy06 Digital Aquarium Fluorescence 24V Analog Probe Optical Arduino Dissolved Oxygen Sensor

• Warranty: 1
• Model: Veinasa-Rjy06
• Measuring Principle: Fluorescence-Based Method
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Veinasa-RJY06
• Measuring Range: 0 ~ 20.00mg/L(0 ~ 200% Saturation, 25ºC)
• Resolution: 0.01 Mg/L, 0.1 ºC
• Accuracy: ± 2% F.S., ± 0.3 ºC
• Output Mode: RS-485(Modbus/RTU)
• Working Conditions: - 5 ~ 65 ºC
• Power Supply: 12 ~ 24 VDC
• Shell Material: POM and 316L Stainless Steel
• Power Consumption: @ 0.2 W 12 V
• Transport Package: Covered with Carton Package
• Trademark: Veinasa
• Origin: China
• Package Size: 35.00cm * 25.00cm * 20.00cm
• Package Gross Weight: 1.000kg

Product Description

Veinasa-RJY06 Digital Aquarium Fluorescence 24v Analog Probe Optical Arduino Dissolved Oxygen Sensor
 

Product Description

Veinasa-RJY06 integrated online fluorescence-based dissolved oxygen sensor is designed based on the quenching principle of excited fluorescence by specific substances in physics. When the excited light is irradiated on the fluorescent material on the surface of the fluorescent film head, the fluorescent material will be excited and emit fluorescence. The quenching time of fluorescence is affected by the concentration of oxygen molecules on the surface of the fluorescent film head. By detecting the phase difference between fluorescence and excitation light and comparing it with the internal calibration curve, the concentration of oxygen molecules can be calculated, and the final value can be output through temperature and salinity compensation.

Technical Parameters

Model	Veinasa-RJY06
Measuring principle	Fluorescence-based method
Measuring range	0 ~ 20.00mg/L(0 ~ 200% saturation, 25ºC)
Resolution	0.01 mg/L, 0.1 ºC
Accuracy	± 2% F.S., ± 0.3 ºC
Temperature compensation	Automatic temperature compensation (Pt1000)
Output mode	RS-485(Modbus/RTU)
Working conditions	0 ~ 45ºC, <0.2 MPa
Storage temperature	- 5 ~ 65 ºC
Installation mode	Immersion installation
Length of the cable	5 meters; other length can be customized
Power consumption	@ 0.2 W 12 v
Power supply	12 ~ 24 VDC
Protection grade	IP68
Calibration	Two-point calibration
Lifetime of fluorescent film head	1 year (under normal use)
Shell material	POM and 316L stainless steel

 

Dimensional Drawing

-No need of electrolyte, no polarization;
-Do not consume oxygen and not be subject to the flow rate;
-With built-in temperature sensor, which can automatically compensate temperature;
-With built-in salinity compensation, and flexible parameter setting;
-Not be subject to the disturbance by chemical substances such as sulfide;
-Small drift, quick response, and more accurate measurement;
-A long service cycle and a lower cost;
-Convenient to replace the fluorescent film head and easy to maintain;
-RS-485 interface, Modbus/RTU protocol;
-Low power consumption and anti-interference design.

 

1.Installation

The sensor should be fixed and installed after immersed below the liquid level. During installation and use, attention should be paid not to collide or scrape the surface of the fluorescent film head, and not for underwater precipitate to attach the fluorescent film head. The rubber cover should be removed for use.

 

2.Electrical Connection The cable is 4-core twisted-pair shielded wire, and the definition of line sequence is as follows:
-Red line -- power cord (12~24VDC)
-Black line -- ground wire(GND)
-Blue line -- 485A
-White line -- 485B Check the wiring sequence carefully before power-on to avoid unnecessary losses caused by wiring errors. Wiring instructions: Considering that the cables will be immersed in water (including sea water) or exposed to air for a long time, all wiring points are required to be waterproofed, and the user's cables should have certain corrosion resistance.
 

Application Case

 

Company Profile

 

 

FAQ

Q: Are you a factory/manufacturer? A: Yes, we are a professional factory/manufacturer of water quality sensors. We also have hot sale and widely used weather sensors.

Q: What are the power supply output and common signal output?
A: The common power supply output and signal output are 12~24VDC and RS485 respectively. But we can customize for you as demands.
Q: How can I collect data?
A: If you have your own data logger, you only need to buy our sensor and meanwhile we send you communication protocol. If you do not have, we can add our data logger for you, also provided with English software, which can help you read, inquire and download data.
Q: What's the lifetime of this integrated online fluorescence-based dissolved oxygen sensor?
A: At least 5 years long. Every sensor has its own calibration certificate or testing report.
Q:What's the delivery time?
A: Usually, we dispatch goods in 3-5 working days after receiving your payment. But it depends on your quantity.
Q: May I know your warranty?
A: Yes, usually it's 1 year. We can send you detailed warranty document if needed.

With rich experiences in tackling problems, Veinasa aims to provide a package of meteorological solutions to your needs, whatever problems you encounters,Veinasa team always stand by your side.
 

Packaging & Shipping