Veinasa-Adnhn06 Industrial Online Nh4 Ammonia Nitrogen Sensor Digital RS485 Analyzer Water Quality Tester for Water Treatment

• Contact: Contact
• Output Signal Type: Customized
• Material: Plastic
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Veinasa-ADNHN06
• IP Rating: IP68
• Certification: Factory Test
• Customized: Customized
• Product Name: Ammonia Nitrogen Sensor
• Measuring Range: 0~10.00mg/L(0~100.00mg/L)
• Resolution: 0.01mg/L
• Accuracy: ±10% or ±1mg/L
• Working Temperature: 0~40ºC
• Working Pressure: <0.1MPa
• Medium pH Range: 4~10 pH
• Power Supply: 12~24VDC ±10%
• Signal Output: RS-485 Bus, Modbus/RTU Protocol
• Transport Package: Covered with Carton Packing
• Trademark: Veinasa
• Origin: China
• Package Size: 22.00cm * 25.00cm * 20.00cm
• Package Gross Weight: 1.700kg

Product Description

Veinasa-ADNHN06 RS485 Total Digital Seawater Water Quality Test Kit Online Ammonia Nitrogen sensor

Product Description

 

Veinasa-ADNHN06 Industrial Online NH4 Ammonia Nitrogen Sensor Digital RS485 Analyzer Water Quality Tester for Water Treatment is an integrated online ammonia nitrogen sensor is fabricated using a PVC membrane-based ammonium ion selective electrode for testing ammonium ion content in water with temperature compensation to ensure fast, simple, accurate and economical testing.

Product Parameters

Model	Veinasa-ADNHN06
Measuring range	0~10.00mg/L(0~100.00mg/L)
Resolution	0.01mg/L
Accuracy	±10%±1mg/L
Working temperature	0~40ºC
Working pressure	<0.1MPa
Medium PH range	4~10 pH
Temperature compensation	Temperature compensation (Pt1000)
Power supply	12~24VDC ±10%
Signal output	RS-485 bus, Modbus/RTU protocol
Wetted material	PVCPOM
Installation	3/4NPT thread, immersion installation
Cable length	5 meters, other lengths can be customized
Calibration	Two-point calibration
Power consumption	<0.3W@12V
Protection grade	IP68

Product Features

Note: The sensor should not be installed upside down or horizontally when installed, at least at an angle of 15 degrees or more.

2.Wiring method

 

a) Red line - power cord (12 ~ 24V) b) Black line - ground (GND) c) Blue line - 485A d) white line - 485B e) bare wire - shielded wire

After wiring is completed, it should be carefully checked to avoid incorrect connections before powering up.

Cable specification: Considering that the cable is immersed in water (including sea water) for a long time or exposed to the air, the cable has certain corrosion resistance. The outer diameter of the cable is Φ6 mm and all interfaces are waterproof.

Application Field

 

Veinasa-ADNHN06 Industrial Online NH4 Ammonia Nitrogen Sensor Digital RS485 Analyzer Water Quality Tester for Water Treatment can be applied to:

 

Irrigation
Fish Pool
Chemistry experiment

Drinking water

chemistry experiment

Sewage treatment

Industrial wastewater treatment

Company Profile

FAQ