Rwaqs00X RS485 Pm2.5 Pm10 CO2 Temp Rh Pressure Light Noise Gas Indoor Air Quality Sensor Detector Environmental Sensors

• Product Name: Indoor Air Quality Meter
• The Detection Parameters: Pm2.5, Pm10, CO2, Temp, Rh, Pressure, Light, Noise
• DC Power Supply: DC 10-30V
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: RWAQS00X
• The Maximum Power Consumption: 1.5W (24V DC Power Supply)
• Working Environment: Tem-10ºC-55ºC;Humidity 0 to 95%Rh
• Signal Output: RS485 Output (Standard Modbus RTU Protocol)
• Material: ABS
• Installation Method: Wall Mounted, Ceiling Mounted
• Pm10/Pm2.5 Range: 0~1000ug/M3
• Noise Range: 30~130dB
• Transport Package: Covered with Carton Package
• Trademark: Veinasa
• Origin: China
• Package Size: 38.00cm * 35.00cm * 35.00cm
• Package Gross Weight: 1.000kg

Product Description

RWAQS00X RS485 PM2.5 PM10 CO2 Temp RH Pressure Light Noise Gas Indoor Air Quality Sensor Detector Environmental Sensors
 

Product Description

 

RWAQS00X is a multi-factor air environment transmitter independently developed by our company. Used to detect temperature, humidity, PM2.5, PM10, TSP, atmospheric pressure, light, noise, odor, TVOC, CO2, formaldehyde, O3, CO, CH4, O2, SO2, NO2, H2, H2S, NH3 and other elements in the air environment, basically covering all indicators reflecting air quality. The transmitter adopts imported sensor and control chip, which has electrochemical type, high resolution and good stability. The equipment adopts wide voltage 10-30V DC power supply, 485 signal output, standard Modbus-Rtu communication protocol, ModBus address can be set, baud rate can be changed, communication distance up to 2000 meters.
 

Product Parameters

DC power supply	DC10-30V
The maximum power consumption	1.5W (24V DC power supply)
The detection parameters	Temperature, humidity, PM2.5, PM10, TSP, air pressure, light, noise, odor, TVOC, CO2, formaldehyde, O3, CO, CH4, O2, SO2, NO2, H2, H2S, NH3
Working environment:	Temperature -10ºC-55ºC; Humidity 0 to 95%RH No condensation TSP elements: temperature -10ºC-55ºC; Humidity 0 to 70%RH
Signal output	RS485 output (standard Modbus RTU protocol)
Material	ABS
Installation method	Wall mounted, ceiling mounted
PM2.5	0~1000ug/m3	1ug/m3	Particulate matter counting efficiency: 50%@0.3μm, 98%@> =0.5μm. PM2.5 accuracy: ±3%FS (@100μg/m3, 25ºC, 50%RH)	≤2min
PM10	0~1000ug/m3
TSP	0~20000ug/m3	1ug/m3	±%20 or ±30μg/m3 maximum value (@1000ug/m3, 25ºC,50%RH)
Temperature	-40ºC~+120ºC,Default -40ºC~+80ºC	0.1ºC	±0.5ºC(25ºC)
Atmospheric pressure	0~120Kpa	0.1Kpa	±0.15Kpa@25ºC101Kpa
Illumination	0-200,000 Lux	1Lux	±7%(25ºC)
TVOC	0~60000ppb	1ppb	Typical accuracy: 8%FS(@C2H6O, 0.5ppm, 25ºC, 50%RH)
Carbon dioxide	0~5000ppm	1ppm	±(50ppm+ 3%F·S)	2min(available), 10min(maximum accuracy)
Formaldehyde	0~5ppm	0.01ppm	Accuracy: ±5%FS (@1ppm, 25ºC, 50%RH)	≥5 minutes
Ozone	0~10ppm	0.01ppm	Accuracy: ±6%FS (@5ppm, 25ºC, 50%RH)	≥5 minutes
O2	0~25%Vol	0.1%Vol	±2%FS	≥5 minutes
H2S	0~100ppm	1ppm	±2ppm or±10%	≥5 minutes
CH4	0~100%LEL	1%LEL	±5%FS	≥5 minutes
CO	0~1000ppm	1ppm	±5ppmor±10%	≥5 minutes
NO2	0~20ppm	0.1ppm	±5%FS	≥5 minutes
SO2	0~20ppm	0.1ppm	±5%FS	≥5 minutes
H2	0~1000ppm	1ppm	±5%FS	≥5 minutes
NH3	0~100ppm	1ppm	±8%	≥5 minutes
Noise	30~130db	0.1db	±0.5dB (in reference intonation, 94dB@1kHz)
Odor (electrochemical type)	0~5ppm	0.001ppm	Typical accuracy: ±5%FS (@H2S, 500ppb)	≥5 minutes
Odor (semiconductor type)	0.03~3ppm	0.001ppm	±13%FS (@C2H6O, 5ppm,20ºC, 65%RH)	≥60 minutes

 

Product Display

 

Application Case

 

As a gas detect sensor and dust particle sensor RWAQS006A can be applied to thefollowing fields:

 

School
Hospital
Pharmaceutical industry
Food industry
Office building
Shopping mall

 

Company Introduction

 

FAQ

 

Q: Are you a factory/manufacturer?

A: Yes, we are a professional factory/manufacturer of water quality sensors. We also have hot sale and widely used dust sensor XS-PM10/XS-PM2.5.
 

Q: What are the power supply output and common signal output?

A: The common power supply output and signal output are 10~30VDC and RS485 respectively. But we can customize for you as demands.

 

Q:What parameters can this dust particle sensor?

A:This sensor is widely used to detct PM2.5, PM10, temperature, humidity, CO2, light and noise. Other parameters like odor, TVOC, CO2, formaldehyde, O3, CO, CH4, O2, SO2, NO2, H2, H2S, NH3 and so on also can be added. Up to 11 elements can be measured.

 

Q: How can I collect data?

A: If you have your own data logger, you only need to buy our sensor and meanwhile we send you communication protocol.

If you do not have, we can add our data logger for you, also provided with English software, which can help you read, inquire and download data.

 

Q: What's the lifetime of this gas detect sensor?

A: At least 5 years long. Every sensor has its own calibration certificate or testing report.
 

Q:What's the delivery time?

A: Usually, we dispatch goods in 3-5 working days after receiving your payment. But it depends on your quantity.

 

Q: May I know your warranty?

A: Yes, usually it's 1 year. We can send you detailed warranty document if needed.

RWAQS00X RS485 PM2.5 PM10 CO2 Temp RH Pressure Light Noise Gas Indoor Air Quality Sensor Detector Environmental Sensors

With rich experiences in tackling problems, Veinasa aims to provide a package of meteorological solutions to your needs, whatever problems you encounters, Veinasa team always stand by your side.
 

Packaging & Shipping