Sulfur Ozone Dioxide O3 So2 Sensors Monitor Analyzer RS485 Gas Leak Detector with Solar Radiation Shield

• Power Supply: 10-30VDC
• Output Signal: RS485 Output (Standard Modbus RTU Protocol)
• O3 Range: 0~10ppm
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: O3 SO2
• O3 Accuracy: ±6%Fs
• So2 Range: 0~20ppm
• So2 Accuracy: ±3%Fs
• The Detection Parameters: O3 and So2
• Temperature Working Environment: - 10 ºC - 55 ºC
• Humidity Working Environment: 0 ~ 95% Rh
• Transport Package: Covered with Carton Packing.
• Specification: O3 resolution: 0.01ppm SO2 resolution: 0.1ppm
• Trademark: Veinasa
• Origin: Sichuan, China
• Production Capacity: 1000 Piece/Pieces Per Month

Product Description

Sulfur Ozone Dioxide O3 SO2 Sensors Monitor Analyzer RS485 Gas Leak Detector with Solar Radiation Shield

Product Description

 

Sulfur Ozone Dioxide O3 SO2 Sensors Monitor Analyzer RS485 Gas Leak Detector with Solar Radiation Shield is a 2 in 1 gas sensor which can be used to measure O3 and SO2.

 

The integrated louver can be widely used in environmental detection. It is installed in the louver, and the equipment adopts standard MODBUS-RTU Communication protocol, RS485 signal output, communication distance up to 2000 meters (measured). The transmitter is widely used to measure the ambient air quality and other occasions, safe and reliable, beautiful appearance, easy to install, durable.

 

Product Parameters

 

DC power supply	(default) DC 10-30V
The maximum power consumption	Less than 0.8W
The detection parameters	O3, SO2
Working environment:	Temperature - 10 ºC - 55 ºC; humidity 0 ~ 95% RH, non condensing
Signal output	RS485 output (standard Modbus RTU protocol)
Material	ABS
Installation method	Bracket installation
Signal output	RS485 output (standard Modbus RTU protocol)
Material	ABS
Installation method	Bracket installation
Detection parameters	Measurement range	Resolution	Accuracy	Preheating time
O3	0~10ppm	0.01ppm	±6%FS	≥5 min
CO	0~1000ppm	1ppm	±3%FS	≥5 min

 

Product Display

Characteristics:

 

 

1.Small size and light weight. 2.Made of high quality UV resistant material for long service life. 3.Using high-sensitivity probe, has stable signal and high precision 4.The key components are imported devices, which are stable and reliable, and have the characteristics of wide measurement range, good linearity, good waterproof performance, convenient use, convenient installation, and long transmission distance. 5.Set a variety of measurement elements in one, powerful. 6.The gas cell uses electrochemical and catalytic combustion sensors with excellent sensitivity and repeatability. 7.Using special RS485 circuit, stable communication, 10 ~ 30V wide voltage range power supply.
 

Writing Method

Wide - voltage power supply input 10-30V. 485 when wiring the signal line, notice that the two lines of A\B cannot be connected in reverse, and the addresses of multiple devices on the bus cannot conflict.

 

	The line color	Instructions
Electricity the source	Brown	Power positive (10~30V DC)
	Black	The power negative
Tong the letter	Yellow	485 - A
	Blue	485 - B

Application case

 

Applicartions:

 

This transmitter is widely used for measuring air quality in chemical companies, meterology, scientific research, pharmaceutical Industry and so on.

Company Profile

FAQ

Q: Are you a factory/manufacturer?

A: Yes, we are a professional factory/manufacturer of water quality sensors. We also have hot sale and widely used weather sensors XS-PM01 which can be used to measure PM2.5 and PM10.
 

Q: What are the power supply output and common signal output?

A: The common power supply output and signal output are DC10-30V and RS485 respectively. But we can customize for you as demands.

 

Q:Can other parameters be added?

A:Of course, you can add formaldehyde (CH2O), ozone (O3), oxygen (O2), hydrogen sulfide (H2S), methane (CH4), sulfur dioxide (SO2), hydrogen (H2), ammonia (NH3), carbon monoxide (CO), nitrogen dioxide (NO2) and other parameters in the environment. We accept customized service.

 

Q: How can I collect data?

A: If you have your own data logger, you only need to buy our sensor and meanwhile we send you communication protocol.

If you do not have, we can add our data logger for you, also provided with English software, which can help you read, inquire and download data.

 

Q: What's the lifetime of this sensor?

A: At least 5 years long. Every sensor has its own calibration certificate or testing report.
 

Q:What's the delivery time?

A: Usually, we dispatch goods in 3-5 working days after receiving your payment. But it depends on your quantity.

 

Q: May I know your warranty?

A: Yes, usually it's 1 year. We can send you detailed warranty document if needed.

NO2 Tester Nitrogen Dioxide Meter Portable CO Gas Monitor Carbon Monoxide Detector Sensor Solar Radiation Shield

With rich experiences in tackling problems, Veinasa aims to provide a package of meteorological solutions to your needs, whatever problems you encounters, Veinasa team always stand by your side.

Sulfur Ozone Dioxide O3 SO2 Sensors Monitor Analyzer RS485 Gas Leak Detector with Solar Radiation Shield

Just click the below picture to send us inquiry, to know more, or get the latest catalogue and competitive quotation. Do not hesitate!

Packaging & Shipping