Veinasa-Jfs Photovoltaic Weather Station Solar Energy Tracker Using Net Radiation Sesnor Balance Meter Radiation Solar Sensor

• Theory: Resistance Sensor
• Product Name: Radiation Solar Sensor
• Sensitivity: 7-14V/Wm2
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Veiansa-JFS
• Spectral Response: 280nm-50000nm
• Response Time: ≤1 Min(99%)
• Tolerance of Two-Sided Sensitivity: ≤10%
• Resistance: About 150Ω
• Power Supply: 12VDC
• Output Mode: 4-20mA
• Brand: Veinasa
• Transport Package: Packed with Carton
• Trademark: Veinasa
• Origin: China

Product Description

Veinasa-JFS Photovoltaic Weather Station Solar Energy Tracker Using Net Radiation Sesnor Balance Meter Radiation Solar Sensor
 

Product Description

 

Veinasa-JFS Photovoltaic weather station solar energy tracker using Net radiation sesnor balance
meter radiation solar sensor, also called balance meter(radio meter), is used to measure the
radiation levels of the sun's radiation and ground radiation. The measurement range is full wave
radiation including ultraviolet, visible and infrared.
The sensor on this meter is a rapid response line, multiple electro-plating thermoelectric piles,
which has the advantage of fast response, wide spectrum response, good linearity and stable operating.

Product Parameters

 

Sensitivity	7-14µV/WM2
Spectral response	0.28µm-50µm
Response time	≤1 min(99%)
Tolerance of two-sided sensitivity	≤10%
Resistance	about 150Ω
Weight	1.0kg

 

Product Display

 

Veinasa-JFS Photovoltaic weather station solar energy tracker using Net radiation sesnor balance
meter radiation solar sensor is a new type of net meter developed on the basis of the traditional net
radiation meter. It solves the shortcomings of the traditional net meter, such as often inflating it with
balloons (once/3 days), frequently replacing the polyethylene transparent film (once/months), poor
sealing performance, easy entry of water, manual maintenance, etc. We now adopt an imported
transparent material as a filter cover to make it achieve fully sealed, non inflatable, free maintenance
and other aspects. This technology has become a new breakthrough in the domestic net
radiation meter, reaching the level of similar advanced products abroad.
 

Application Case

 

Veinasa-JFS Photovoltaic weather station solar energy tracker using Net radiation sesnor balance
meter radiation solar sensor daily work should begin with checking whether the hemispherical cover
is clean. If ther is dust or moisture condensation, it should be in time blew using rubber pipette bulb
or cleaned with soft cloth or optical lens paper, to avoid scratches. If the damage of the hemispherical
cover is found, it should be replaced immediately to prevent water inflow, thus the sensitivity change will
affect the measurement accuracy.

If you encounter the climate of a river or a sandstorm, you need to cover it in time.
If the output is zero, it means that the radiometer is either short-circuited or the
positive and negative the output wire is opposite; if the logger indicates that the
variable is unstable, then it's short-circuited, and has to check the wire and the socket.
The method: measure the two output terminals with a digital table, and if there is a
resistance value, the radiation meter is in good condition. If it is zero, it indicates a
short circuit; If it is infinite, indicate the opening of the radiation meter.

If there is a failure, please send it back to the manufacturer for repair.
 

Company Profile