Veinasa-Dgts 10/20/30/40cm Multi-Depth RS485 Modbus RTU Soil Humidity Temperature Smart Agriculture Sensors

• Customization: Available
• Installation Type: Buried in Soil
• Contact: Contact
• Model NO.: Veinasa-DGTS
• Output Signal Type: RS485
• Measuring Medium: Soil Temperature and Moisture
• IP Rating: Ground Part: IP67; Below Ground: IP68
• Response Time: Respond Within 3s After Electrification
• Work Environment: -40 ºC ~ 80 ºC; 0-100%Rh
• Mean Time Between Failures: ≥25000h
• Induction Range: 99% Is Read From a Range Within The 10cm Outside T
• Stabilization Time: About 10 Seconds After Power-on to The Stabilizati
• Transport Package: Covered with Carton Package
• Specification: ground part: IP67; below ground: IP68
• Trademark: Veinasa
• Origin: China
• Production Capacity: 1000pieces/Years

Product Description

Veinasa-DGTS Soil Temperature and Humidity Sensor With RS485 Soil Tester Digital Soil Temperature Humidity Sensor

Product Description

 Veinasa-DGTS Soil Temperature and Humidity Sensor With RS485 Soil Tester Digital Soil Temperature Humidity Sensor is a integrated multi-depth moisture monitor and adopts FDR principle. It is not only a RS485 tempersture but also a RS485 moisture sensor.

The humidity of each soil layer is measured according to the frequency change of electromagnetic waves emitted by the monitor in different dielectric constant materials, and the temperature of each soil layer is measured by a high-precision digital temperature sensor.By default, the temperature and humidity of 10cm, 20cm, 30cm and 40cm soil layers are measured simultaneously, which is suitable for long-term uninterrupted monitoring of representative soils;

This multi-depth soil sensor can be built-in RTU and battery, can provide RS485 output, LORA wireless transmission, can also transmit data to the Internet of Things data platform through GPRS wireless network, and view data in real time with computer and mobile phone, convenient and fast, greatly satisfying the needs of all aspects.

Product Parameters

Item	Technical Parameters
Soil Moisture(Volume Water Content) Measurement  Range	dry soil ~ water saturated soil, laboratory measurement accuracy: ± 3%, field measurement accuracy: ± 5%, humidity resolution: 0.1%, temperature resolution 0.1 ° C;
Temperature Measurement Range	-50 ° C ~ 80 ° C, measurement accuracy ± 0.5 ° C, temperature resolution: 0.1 ° C
Power Supply Mode	Optional adapter DC12~24V wide voltage supply or built-in lithium battery
Communication Mode	RS485communication,MODBUS communication protocol, (baud rate 9600 can be set, address 0-255 can be set); LORA wireless communication, GPRS wireless communication;
Writing Mode	RS485 output 4-wire system, power supply, power supply negative, 485+, 485-, LORA/GPRS wireless transmission wiring has been built in;
Response Time	Respond within 3s after electrification
Stabilization Time	About 10 seconds after power-on to the stabilization process
Outline Dimension	The length varies with the number of sensors, and the standard length is about 860mm.
Sensor Measuring Principle	FDR frequency domain reflection method
Power Consumption	Power consumption is less than 10mA in static state and 70 mA in sampling
Work Environment	-40 ºC ~ 80 ºC; 0-100%RH
Mean Time Between Failures	≥25000h
Induction Range	99% is read from a range within the 10cm outside the pipe
Shell Protection Grade	Use epoxy resin as sealing material, ground part: IP67; below ground: IP68

Product Features

Main characteristics of Veinasa-DGTS Soil Temperature and Humidity Sensor With RS485 Soil Tester Digital Soil Temperature Humidity Sensor

 

1.With multi-depth moisture and temperature measurement capability, standard nodes: 10cm, 20cm, 30cm, 40cm depth, real-time monitoring, fast and convenient;
2. Different products with different depths and different configurations can be customized according to different applications;
3.It adopts special custom PVC plastic pipe to prevent aging and resist the corrosion of acid and alkali salts in the soil;
4.Using epoxy resin as a sealing material, it can be soaked in water for a long time without leakage;
5.High measurement accuracy, reliable performance, less impact on soil soil, suitable for all kinds of soil quality;
6.It has multi-directional anti-misconnection protection for power line, ground line and signal line;
7.Support RS485 digital output, LOORA wireless transmission, and GPRS wireless network data transmission according to requirements;
8.Different power supply schemes: DC12~24V DC power supply; solar power supply, long-term continuous power supply; built-in long-lasting lithium battery for continuous power supply, power supply capacity design once full for one month (active reporting mode, 1 hour report once)
9.Free on-site setting and calibration design, ready to use at any time on site;
10.Free Internet cloud platform service, support to log in to the cloud platform anytime and anywhere to view and analyze the corresponding data;
11.With impact-resistant packaging, transportation and storage are safer;
12.Has sleep wake-up;

Application Fields

 

The application fields of Veinasa-DGTS 10/20/30/40cm Multi-depth RS485 Modbus Rtu Soil Humidity Temperature Smart Agriculture Sensors:

 

At present, the products are widely used in environmental information monitoring and collection in industries such as agriculture, forestry, environmental protection, water conservancy, meteorology, etc., and also used in water-saving irrigation, flower gardening, grassland pasture, soil speed measurement, plant cultivation, greenhouse control, Fine agriculture, etc., to meet the needs of scientific research, production,
teaching and other related work.

Company Profile

FAQ

Q: Are you a factory/manufacturer?

A: Yes, we are professional factory/manufacturer of weather station and relative weather sensors. We also have hot sale and widely used weather station AWS005S.

Q: What's the common power supply and signal output?
A: Common power supply and signal output is DC12-24V, RS485. But we can customize for you as demands.

Q: How can I collect data?
A: If you have your own data logger, you only need to buy our sensor and meanwhile we send you communication protocol.

If you do not have, we can add our data logger for you, also provided with English software, which can help you read, inquire and download data.

Q:What's the delivery time?
A: Usually, we dispatch goods in 3-5 working days after receiving your payment. But it depends on your quantity.

Q: May I know your warranty?
A: Yes, usually it's 1 year. We can send you detailed warranty document if needed.

With rich experiences in tackling problems, Veinasa aims to provide a package of meteorological solutions to your needs, whatever problems you encounters, Veinasa team always stand by your side.

Just click the below picture to send us inquiry, to know more, or get the latest catalogue and competitive quotation. Do not hesitate!

Packaging & Shipping